1.1 Overview
Brand: Etross or OEM Brand
Model no.: FWT-8848
Product name: CDMA Fixed Wireless Terminal
Frequencies: CDMA 900/1800 MHz dual band
Etross-8848 is a CDMA to Analog Converter, the device can produce a FXS line to allow a regular phone to be connected and used just like a local landline(PSTN) except your calls will go out from the CDMA network. This device can both receive and make calls. So It is widely used in home &office, public phone, rural areas, steamer, railway etc.
1.2 Main features
1) Simple to install and easy to maintain
2) Steady industrial module(SIM340) and reliable design ensures good performance
3) Provides optimized circuit directly connecting the exchange device for Extensions
4) Compatible to most telephones, PBX and VoIP gateways (for call Termination)
5) Connect to Alarm systems to realize wireless alarm(for security use)
6) Strong signals with high gain antenna
7) Support SIM card (1.8V,3V)
8) Support DTMF 2'nd dialing out
9) DTMF CLIP(Caller ID display)
10) Hide subscriber caller id (been sent out)
11) Provides reversal polarity signal for metering
12) Signal indiator and power indicator and working status indicator
13) Suitable for wide voltage range and low power consumption
14) Suitable for all kinds of weather and environment
15) Locking PIN / network (optional)
16)DATA function for internet(optional)
17) Back up li-ion battery(optional)
1.3 Specifications
1) Air interface: CDMA 800/1900Mhz IS-2000
800Mhz 1900Mhz
2) Frequency ranges:
A)RF receiving (RX): 869 ~ 894Mhz 1930 Mhz ~ 1990 Mhz
B)RF transmitting (TX): 824 ~ 849Mhz 1850 Mhz ~ 1910 Mhz
3) Channel space: 200kHz
4) User line, bell signal: In line with GB/T15279
5) Max power: 0.25W / 0.5W
6) Consumption:
A) Immobility: Less than 25mAh
B) Transmission: Less than 400mAh
7) Sensitivity: -105dB
8) Dial tone frequency: 450MHz (standard)
9) Surrounding temperature: -10°C ~ +40°C
10) Relative humidity: 45% ~ 90% (without frost)
11) Atmosphere pressure: 86 ~ 106KPa
12) Environment noise: <60dB
13) Antenna amplifying: 3.5dB (omni directional), 12dB (certain direction /Chosen direction)
14) AC power: DC 10V - 20V
15) Input: AC100 - 230V, 50 / 60Hz
16) Output: 12V 1A
17) Switching type / transformer type AC adapter (optional)
18) Connector of power: US or European type
19) Dimensions (L x W x H) (average): 185 x 135 x 22mm
20) Weight:
A) FWT: 400g
B) Full set with AC adapter, antenna and box: 700g
21) Colors: White/grey/black (optional)
22) Connection mode: RJ-11 phone sockets
23) Antenna connection: SMA antenna connection
1.4 Standard Component
Item | Qty | Remarks |
CDMA FWT 8848 | 1 | |
User's Manual | 1 | Printed |
| Antenna | 1 | 3 metre antenna |
Power Supply | 1 | Input: AC100 - 230V, 50 / 60Hz , Output: 12V 1A |
Packing
Inner box MEAS | |
G.W./unit | 0.75kg |
Carton MEAS | 55*34.5*32.5cm |
G.W. | 16kg |
PCS/CTN | 20pcs |